Delivery Spreadsheet - Let's Track These Inbound SEs

  • Thread starter Thread starter F14Scott
  • Start date Start date
  • Replies Replies 3K
  • Views Views 594K
My production date has slipped from the 10th to the 11th to the 15th to the 16th to the 17th. It feels like when you teach a kid to swim and slowly back away from them in the pool! Being able to track this is a blessing and a curse.
 
Since I've been at port since April 29th, I've been monitoring the ships like a hawk!

I just found this aerial photo of your MINI (OK, I've rolled out this photo many times before, but the first time I posted it, my SE had been sitting here for more than a month, thanks to the first wave of COVID disrupting the RORO shipping lines.)

upload_2022-5-12_9-39-28.webp
 
I am bummed. I cannot believe I slept through the "Assembly in Progress" phase, only to wake up to see it is in "Quality Check.":)

It is like missing the birth of a child (not).o_O What kind of lousy parent am I missing the birth?

In the past 12 hours it went from paint booth to quality check for those tracking. I am predicting June 22nd in my grimy mitts. :D
 
Last edited:
An excellent cosmos-manipulation ploy to get your SE to arrive during the week of the 29th. I hope it works!
I know, right? Looks like my wife and I will be doing most of the paperwork remotely while I'm in Guatemala and then I get back on a Monday morning on a redeye and go straight to the dealership.
 
I just found this aerial photo of your MINI (OK, I've rolled out this photo many times before, but the first time I posted it, my SE had been sitting here for more than a month, thanks to the first wave of COVID disrupting the RORO shipping lines.)

View attachment 16372
Hah, yea I think I've seen that one before!

Believe me - I've wished many times I had access to some real time satellite imagery so I could check in on the lots there!!

I had been doing so well with my wait for the SE up until it was produced. Now I can't stop checking in on it.

I waited a year and 3 months for my Mach-E, and that was brutal on my impatience and anxiousness (totally worth it though), so I figured waiting a few months for the SE wouldn't be too bad...
 
My production date has slipped from the 10th to the 11th to the 15th to the 16th to the 17th. It feels like when you teach a kid to swim and slowly back away from them in the pool! Being able to track this is a blessing and a curse.

It only gets worse…I’m currently trying to figure out why the vessel my SE is on has been sitting for ~36hrs outside the Panama Canal…the internet says this is normal. I’m discovering it can be much worse, during peak shipping season the wait can be over a week. I’m assuming the the boat (Hestia Leader) will still arrive at Oxnard on the 21st.
 
Hah, yea I think I've seen that one before!

Believe me - I've wished many times I had access to some real time satellite imagery so I could check in on the lots there!!

I had been doing so well with my wait for the SE up until it was produced. Now I can't stop checking in on it.

I waited a year and 3 months for my Mach-E, and that was brutal on my impatience and anxiousness (totally worth it though), so I figured waiting a few months for the SE wouldn't be too bad...
My wife was making fun of me for following the red SE. Then we went to a PCA social and she made the mistake of ragging on me for following the Mini.

One guy says he followed his 911 Turbo, Cayenne, and is now following his Taycan. He told her exactly where it was in the assembly process, when he expects it to ship and the date expects it to be in his hands. Another chimes in about the Cayman he followed, and how he plans on following the Spyder....

She rolled her eyes and said we are all geeks. She is right!!
 
I just remind myself that when I've ordered European made cars before I moved to the U.S., they spent 12 weeks or so on the boat alone...so it makes the wait this time much easier!
 
It only gets worse…I’m currently trying to figure out why the vessel my SE is on has been sitting for ~36hrs outside the Panama Canal…the internet says this is normal. I’m discovering it can be much worse, during peak shipping season the wait can be over a week. I’m assuming the the boat (Hestia Leader) will still arrive at Oxnard on the 21st.

According to the week 18 schedule, I'm waiting for 5/26 ride on the Grand Cosmo, currently moored in Spain, due at Port Hueneme 6/17. I may see it by August, ugg... wish we could access the car's GPS location service utilities. I'm sure BMW and MINI can!
 
It only gets worse…I’m currently trying to figure out why the vessel my SE is on has been sitting for ~36hrs outside the Panama Canal…the internet says this is normal. I’m discovering it can be much worse, during peak shipping season the wait can be over a week. I’m assuming the the boat (Hestia Leader) will still arrive at Oxnard on the 21st.

You should fly down to Panama and wave it your car as it goes through the locks! I spent hours at the canal just watching ships going up and down when I was done there a few years ago.
 
Since I've been at port since April 29th, I've been monitoring the ships like a hawk!

Next ship coming to Southampton headed to Baltimore should be Thalatta (WW ship). It's headed to Zeebrugge today, then should be off to Southampton before heading to Baltimore.

There's also the Toronto and Olympian Highway that are currently in Bremerhaven making the same journey to Zeebrugge, Southampton, and then Baltimore.

All three of those ships should be arriving in Baltimore around the end of May. (Thalatta for example seems to be 4 Days ahead of schedule to Zeebrugge)

Note that my SE arrived at port on the 29th, and there were 2-3 ships coming into port around that time and I still didn't make it onto them. So your luck may vary as to how quickly you can get on a ship.

I've attached current shipping schedule for K-Line and WW.
 
Since I've been at port since April 29th, I've been monitoring the ships like a hawk!

Next ship coming to Southampton headed to Baltimore should be Thalatta (WW ship). It's headed to Zeebrugge today, then should be off to Southampton before heading to Baltimore.

There's also the Toronto and Olympian Highway that are currently in Bremerhaven making the same journey to Zeebrugge, Southampton, and then Baltimore.

All three of those ships should be arriving in Baltimore around the end of May. (Thalatta for example seems to be 4 Days ahead of schedule to Zeebrugge)

Note that my SE arrived at port on the 29th, and there were 2-3 ships coming into port around that time and I still didn't make it onto them. So your luck may vary as to how quickly you can get on a ship.

I've attached current shipping schedule for K-Line and WW.
@moncureww
Sharing the consolidated list I made for my own reference:

BOAT - DEPART SOUTHAMPTON - ARRIVE BALTIMORE
K-line Olympian HWY - May 16 - May 25
WW Thallatta - May 20 - May 29
WW Toronto - May 21 - May 30
K-Line Donington - May 21 - May 30
WW Endurance - May 23 - June 8
K-Line Orion HWY - May 25 - June 8
WW Thermopylae - May 25 - June 9
K Line Hawaiian HWY - June 6 - June 20
 
Last edited:
P
@moncureww
Sharing the consolidated list I made for my own reference:

BOAT - DEPART SOUTHAMPTON - ARRIVE BALTIMORE
K-line Olympian HWY - May 16 - May 21
WW Thallatta - May 20 - May 29
WW Toronto - May 21 - May 30
K-Line Donington - May 21 - May 30
WW Endurance - May 23 - June 8
K-Line Orion HWY - May 25 - June 8
WW Thermopylae - May 25 - June 9
K Line Hawaiian HWY - June 6 - June 20
The Olympian Highway has an ETA in Baltimore of 5/25. I think the 5/21 you listed above is a typo. Thanks for the info!!!
 
My SE dispatched from the factory today. Does anyone know which ships are headed to Baltimore next? The soonest I could find was one on the 16th, arriving to Baltimore on the 25th.( Too bad I'm leaving out of country for a week on the 29th! )
I think mine will be on the same boat, also dispatched today, also headed to Baltimore.
 
I am bummed. I cannot believe I slept through the "Assembly in Progress" phase, only to wake up to see it is in "Quality Check.":)

It is like missing the birth of a child (not).o_O What kind of lousy parent am I missing the birth?

In the past 12 hours it went from paint booth to quality check for those tracking. I am predicting June 22nd in my grimy mitts. :D

I missed a lot myself - I woke up and it was done. These are exciting times. If mine ships out in the next week or so, I'll be getting it in just about three months from order - which is fantastic for a Signature (base model, no sunroof) SE. I need to get my 240v 50a breaker / circuit setup wired up at the house now for the flex charger!
 
I'm hoping mine doesn't end up sitting at the VDC for an extended period. I can't imagine they're processing a bunch of cars at the moment and thus it's a pretty quick turnaround. It's due at Port Hueneme in 9 days with my dealer being about 7hrs from the port. I'm hoping to take delivery the week of May 23rd or May 30th. I just sold my 5 series this morning as the registration was due in a week or so (and California most certainly does not refund registration as I unfortunately found out years ago). Hoping we can managed on 1 car for 2-3wks.
 
I missed a lot myself - I woke up and it was done. These are exciting times. If mine ships out in the next week or so, I'll be getting it in just about three months from order - which is fantastic for a Signature (base model, no sunroof) SE. I need to get my 240v 50a breaker / circuit setup wired up at the house now for the flex charger!
With a 100 mile range the 32A juice box had my base red SE charged in a few hours. If you will have only the SE for an electric, it may not be worth the $$ for a bigger charger. I think i was getting 15 miles every hour with 32A.
 
With a 100 mile range the 32A juice box had my base red SE charged in a few hours. If you will have only the SE for an electric, it may not be worth the $$ for a bigger charger. I think i was getting 15 miles every hour with 32A.
They were referring to the included EVSE with 2023's. The Flexcharger would require a 14-50 receptacle to charge at 240V, unless you managed to purchase an additional adapter for lower amperage 240V charging (and those adapter plugs seem to be hard to come by from BMW).

Always a good idea to go for the largest wiring/circuit you can for future proofing (Much easier to upgrade the EVSE and breaker than run new wiring).
 
Back
Top