Today I deliberately attempted to get the odometer value updated on HondaLink. It worked. I simply sat in the car, not driving, with the car on, made sure my Android phone was Bluetooth connected to the car, and brought up the HondaLink app on the phone. I did the action of swiping down from the top to make the app refresh itself. Nothing happened at first. I thought I had failed. But about 3 minutes later the odometer reading matched the car's value.Why is the odometer reading on my Hondalink app stuck at the mileage and date of Feb 15th? It always knows the correct battery charge level and lets me know when charging is complete.
I agree, if you are getting charge status then the car and your phone are able to connect by reaching Honda’s server. So it would not appear to be a communication problem. I’d guess it’s in the software side.That is a workaround, at least, but the app should keep the odometer updated without having to manually open the app while sitting in the car while it is running to do so. If the app can tell what the current charge level is then surely it can tell how many miles are on the car at the same time.
Thank you! It didn't update right away, as you said. But immediately after I powered down and exited the car, it updated the odometer to today's mileage and date.Today I deliberately attempted to get the odometer value updated on HondaLink. It worked. I simply sat in the car, not driving, with the car on, made sure my Android phone was Bluetooth connected to the car, and brought up the HondaLink app on the phone. I did the action of swiping down from the top to make the app refresh itself. Nothing happened at first. I thought I had failed. But about 3 minutes later the odometer reading matched the car's value.
Did the secondary driver you are attempting to add to Honda Link receive and reply/accept the invitation?I'm a Clarity brand spankin newbie. When I attempt to add the secondary driver, on to a second iPhone, I cannot get it to advance beyond "pending inivitation". My internet searches aren't returning any useful information. How do I solve this problem?