Do the EV tail lights fit the PHEV?

  • Thread starter Thread starter Tek_Freek
  • Start date Start date
  • Replies Replies 6
  • Views Views 2K
Because it's such a low-volume car, I assume Honda didn't want to manufacture a different set of rear fenders for each model of Clarity to go with model-specific taillight lenses. That's as close as I'll get to guaranteeing all Clarity-model taillight lenses are interchangeable.
 
Clarity PHEV and EV diagrams from Honda Parts site
EV.webp
PHEV.webp
 
This is one of those ideas where you're pretty sure the answer is going to be yes, and then you take it apart and find out that the other lights have completely different connectors. This was the case with the regular gasoline Civic and the Civic hybrid (which also had clear tails).
 
Tek_Freek said:
graure: Did you see the images I posted?
Click to expand...

While I'm sure that the light itself will bolt up just fine, the harness connector may be wired differently, which is exactly what Honda did with the Civics. A possible way to check without having the actual light would be to look up the part number of the BEV harness and see if it's the same as the PHEV one.
 
You must log in or register to reply here.
Back
Top