Kona Door Sills
- Thread starter XtsKonaTrooper
- Start date
- Replies 18
- Views 3K
Wildeyed
Well-Known Member
No, but I do notice how huge, plain and ugly the unadorned ones are every time I open a door!
XtsKonaTrooper
Well-Known Member
Yeah i never liked it on my Ioniq...i might bite the bullet and get them.
XtsKonaTrooper
Well-Known Member
I just bought them. Lol
Probably a good idea as pebble scratches from bottom of feet seem to appear over time no matter how careful you are.
I might investigate a more "cost effective option" as apposed to these :
https://hyundaicanada.com/en/parts-...35&trim=189a93a4-6cd0-429b-97f4-942f0b0ddba6|
XtsKonaTrooper
Well-Known Member
Well the ebay ones are 1/4 the price of hyundai ones.
Prolly the same hehehe
Brennan Raposo
Well-Known Member
I have the Hyundai ones.
They’re expensive but look great. Easy to apply and solid stainless steel. This is the first car I’ve ever owned they didn’t come stock with door sill guards lol!
They’re expensive but look great. Easy to apply and solid stainless steel. This is the first car I’ve ever owned they didn’t come stock with door sill guards lol!
XtsKonaTrooper
Well-Known Member
I got my door sills yesterday from ebay.
It took less than 10 days. Mine were shipped out of Toronto Ontario.
Waiting for weather to warm and install them
They look good.
It took less than 10 days. Mine were shipped out of Toronto Ontario.
Waiting for weather to warm and install them
They look good.
EnerG
Active Member
Love to see these installed. Any pics?
Colin Munro
New Member
I’ve got them, supplied and fit for free from Hyundai uk as an apology for a software problem on my Kona, now fixed. There not cheap to buy though.
Sent from my iPhone using Inside EVs
Sent from my iPhone using Inside EVs
Jared Potter
Member
Amazon.ca has several door sill varieties including ones with the Kona logo.
Weigesi Car Stainless Steel Door Sill Scuff Plate for Hyundai KONA 2018-2019 https://www.amazon.ca/dp/B07BH4N4Z1/ref=cm_sw_r_cp_api_i_SQt-Cb5RQ2GBB
Weigesi Car Stainless Steel Door Sill Scuff Plate for Hyundai KONA 2018-2019 https://www.amazon.ca/dp/B07BH4N4Z1/ref=cm_sw_r_cp_api_i_SQt-Cb5RQ2GBB
Attachments
XtsKonaTrooper
Well-Known Member
^^^^^^
Looks great.
Pretty well same as mine.
Did you use a heating gun, to help with them sticking.?
Looks great.
Pretty well same as mine.
Did you use a heating gun, to help with them sticking.?
You bring up a really good point, I had some issues with some of the areas near the bends. I will heat them up tonight. Thanks!
XtsKonaTrooper
Well-Known Member
^^^^
Yeah i tried to keep mine near the edge, so it had less of a bend and used the heating gun, then pressed down for awhile, so it would set.
Anyone else gets them, i highly recommend using a heating gun.
Yeah i tried to keep mine near the edge, so it had less of a bend and used the heating gun, then pressed down for awhile, so it would set.
Anyone else gets them, i highly recommend using a heating gun.
Thanks again for the tip, the backside near the bends lifted overnight so I took a heat gun as suggested.
XtsKonaTrooper
Well-Known Member
Hopefully overnight, it stays in place
John Lumsden
Active Member
Thanks Sandwedge. That inspired me to do the same and seeing as it was cold and wet the heating gun seems to have worked to make them stick all along.