Expected efficiency/range reduction with trailer hitch installed and rear aero shield removed?

  • Thread starter Thread starter kleini
  • Start date Start date
  • Replies Replies 3
  • Views Views 2K
K

kleini

New Member
Looking to install a trailer hitch on my 2020 Niro EV. Specifically, the Class II receiver (1.25" receiver size). I plan to mainly use it for holding a bike rack. I have looked at installation videos and there is a plastic aero shield that is installed under the rear bumper that has to be removed and modified if you want to re-install it when the hitch is in place. My question is: can I simply keep the aero shield off and how much should I expect that to impact range and efficiency? Anyone done this? I would prefer not to modify the shield because this is a leased vehicle and I don't want any blowback when I return it. Thoughts?
 
kleini said:
Looking to install a trailer hitch on my 2020 Niro EV. Specifically, the Class II receiver (1.25" receiver size). I plan to mainly use it for holding a bike rack. I have looked at installation videos and there is a plastic aero shield that is installed under the rear bumper that has to be removed and modified if you want to re-install it when the hitch is in place. My question is: can I simply keep cinema hd the aero shield off and how much should I expect that to impact range and efficiency? Anyone done this? I would prefer not to modify the shield because this is a leased vehicle and I don't want any blowback when I return it. Thoughts?
Click to expand...
Solved.
 
You must log in or register to reply here.
Back
Top