Any solution for sensitive butts?

  • Thread starter Thread starter Alex800st
  • Start date Start date
  • Replies Replies 11
  • Views Views 2K
A

Alex800st

Active Member
I use Clarity for ubering. Lately my pax started to complain that there is something that bothers their butts in the rear seat - at first tried but could not feel it (I weigh half of my typical pax), but after another complaint I tried and I can feel it now - like a metal bar inside, in the middlebutt.
Only on the right side, left side of the rear seat is ok (which is understandable, it sees way less a-holes than the right).
Before I disassemble the seat, any idea what I will be looking at?
2020, 190 Kkms touring.
 
Sounds like the child seat attach points. They are horizontal bars about two inches in length. They should be a couple of inches in though.
 
turtleturtle said:
IDK. Using the app and it’s just a reference with no image.
Click to expand...
Can you see it here? I copied it, FTP'd it to my website, and used the InsideEVs Image icon to put it here. If you can see it, then the app must be limited to displaying only images submitted this way. If you still can't see it, then maybe the 3024 x 4032-pixel image is too big for the app. I'm going to paste a smaller version below.
tip-box.jpg


If you can see the 300 x 400-pixel image I pasted below, then it must be an image-size problem with the app. The one thing I didn't try is putting the small version on my website and adding it with the Image icon--I just pasted what I copied from Photoshop (which is how I enter the images on almost all my posts).

upload_2023-9-20_22-30-20.webp
 
Alex800st said:
Another mystery solved. My tip box somehow got under the seat (however I don’t even think it’s possible, too big to squeeze in by itself).
Click to expand...
Was your tip box empty when you found it? Perhaps an unscrupulous customer emptied it and then somehow jammed it under the seat, breaking it in the process.
 
insightman said:
Was your tip box empty when you found it? Perhaps an unscrupulous customer emptied it and then somehow jammed it under the seat, breaking it in the process.
Click to expand...

No, all the change was also under the seat. I liked that box, it was 3D-printed to fit the pocket on the back of the front seat.
 
You must log in or register to reply here.
Back
Top