Anyone had to attach their own license plates?

Discussion in 'Clarity' started by Akinto, Jun 15, 2018.

To remove this ad click here.

  1. Akinto

    Akinto Member

    My car is being shipped from northern Quebec to Toronto. I am meeting the trucker at a parking lot and have no idea if there are special tools or hardware required to attach my plates. I need to get this right if I want to take the car home.

    Anyone know? Thanks.
  2. To remove this ad click here.

  3. K8QM

    K8QM Active Member

    Just standard screws on mine - the same size as with our other cars.

  4. KentuckyKen

    KentuckyKen Well-Known Member

    My US model came w Phillips screws. Suggest you bring Phillips and flat head just in case.
  5. Akinto

    Akinto Member

    Thanks a lot.
  6. JohnRev

    JohnRev New Member

    No special tools required. Bigger than the usual Philips screwdriver or a flat head is all that is required. The rear is like any other plates while for the front, you should have been given a plastic bracket that attaches to the pre-existing holes underside of the front bumper. Godspeed.
  7. To remove this ad click here.

  8. prestoOne

    prestoOne Member

    It is Quebec and you are in Ontario, they may screw with you or just be prepared and bing tools and another set of screws for the plate.
  9. Akinto

    Akinto Member

    The dealership has been very nice.

Share This Page