Must-have modifications

Surprised nobody has an "actual size" decal. That is a must!

When the blue one comes in (hopefully this week) I plan on putting one on the Mini, and one on my wife's XC90 that will sit next to it in the garage. She may not see the humor, but I do.
 
chrunck said:
This is the least I've modded any of our MINIs over the years. A few changes in Bimmercode, a sun visor for the passenger side, and I think that's it.
Click to expand...
Do you never get passengers grabbing the handle? Often when I drive with someone they will grab the handle even if I'm not driving hard simply to brace themselves since they don't have a steering wheel like I do. Sometimes when I ride with someone I'll use the grab handle if I feel at risk of being car sick but that only happens in the back seat for me.
 
revorg said:
I'm thinking of the add-ons I added to my first Mini. Stripes - haven't decided on those yet. Yellow tints on the fog lights - not applicable on the fake fogs on the SE. Seals around the bonnet to keep the dust out - doesn't look like I'll need them. Blinking center stop light - might be a bit much since I don't use the brakes anymore. Cargo net for the boot - still using the same one. Silicone fob cover - still works. Air horn - I may have to revive that. Air filter - nope, don't need that.
Click to expand...
What are you doing for the blinking 3rd brake light? I think that's a valuable safety feature that studies have shown really make a difference.
 
Does anyone have a cargo net they recommend? I've found a single bag of groceries or other items will slide around in the back.
 
CrazyLegs17 said:
Does anyone have a cargo net they recommend? I've found a single bag of groceries or other items will slide around in the back.
Click to expand...
Not a cargo net, but I keep a collapsed Insta Crate in the back exactly for these situations.

greenmade-instacrate.jpg
 
OK, I know everyone's tired of my anti-hood-scoop ranting, but in addition to deleting the hood scoop, I had a custom sticker made for my SE. In 2019, I wrote letters to half of the executives at BMW and MINI, begging to pay $1,500 to get the less-expensive, scoopless hood from a base MINI on my SE. Only Oliver Heilmer responded.

I didn't really believe Oliver Heilmer, MINI's head designer, could get me what I wanted, but I wrote to him because no test car (MINI-E), concept sketch, concept car, or pre-production prototype of the upcoming electric MINI Cooper had a hood scoop. I wondered what he would say about the hood scoop added for the production version unveiled July 9, 2019. His letter to me was brief. He said that he would take up my suggestion with marketing. Reading between the lines, I jumped to the conclusion that he agreed with me that an electric car didn't need a fake hood scoop. He was hinting it was those ICE-bound marketing types who decided any MINI Cooper wearing an "S" would get a hood scoop.

So I decided my scoopless MINI Cooper SE would be a tribute to Oliver Heilmer and had this sticker made to celebrate how my SE reflects the master's original design (OK, maybe a little overboard, here).

upload_2022-7-11_21-59-50.webp
 
Dedication to the cause merits a high five from me. I don’t mind the gouge with the impermeable honeycomb at the back, but I think you’re correct in assuming Heilmer was overruled, à la Ridley Scott when Blade Runner was released with Ford’s comically sardonic monotone voiceover track.
 
CastleWolfenstein said:
I'm excited that my order finally got picked up by the factory last week! I want to see all of the mods you've done to your Mini. Currently I have the following bookmarked to order when the time comes closer:
xpel ceramic coating PRIME XR PLUS
FitcamX front and rear dashcam
Beltline Blackout Kit

What are some must-haves that you recommend?
Click to expand...
That’s exciting man! Here’s a a couple photos of mine. I added a splitter and replaced the 2021 SE grille with a 2021 Cooper S grille. RallyArmor mudflaps, tinted taillights, painted my brakes yellow to match the highlights and custom bonnet stripes. I did just a little bit of work on the interior and utilized some red carbon fiber highlights on the window controls on the door handle, the center of the steering wheel, the engine start lever and around the touchscreen display. I had plans to add rally lights on the front, but I’m saving that for the ‘23 Countryman SE that’s coming soon. Thought I’d share what I’ve done to inspire some ideas!
 

Attachments

  • 3730C889-7B47-4E14-B4C8-18624560D022.webp
    3730C889-7B47-4E14-B4C8-18624560D022.webp
    43.7 KB · Views: 182
  • 23EB7842-187D-4DF4-8315-CA6ACE71BC80.webp
    23EB7842-187D-4DF4-8315-CA6ACE71BC80.webp
    49.8 KB · Views: 174
  • 3E8C098D-94C9-4773-AD6F-43875BB82D89.webp
    3E8C098D-94C9-4773-AD6F-43875BB82D89.webp
    13.3 KB · Views: 170
  • 636EB3F0-6674-4446-95AE-7F3885DDE838.webp
    636EB3F0-6674-4446-95AE-7F3885DDE838.webp
    41.8 KB · Views: 171
Jeanette said:
Do you never get passengers grabbing the handle? Often when I drive with someone they will grab the handle even if I'm not driving hard simply to brace themselves since they don't have a steering wheel like I do. Sometimes when I ride with someone I'll use the grab handle if I feel at risk of being car sick but that only happens in the back seat for me.
Click to expand...
They can't grab what isn't there :D

People reach occasionally, but come up empty handed. There are arm rests on both sides, so it's not like they can't brace themselves without the handle.
 
ItsH2Os said:
That’s exciting man! Here’s a a couple photos of mine. I added a splitter and replaced the 2021 SE grille with a 2021 Cooper S grille. RallyArmor mudflaps, tinted taillights, painted my brakes yellow to match the highlights and custom bonnet stripes. I did just a little bit of work on the interior and utilized some red carbon fiber highlights on the window controls on the door handle, the center of the steering wheel, the engine start lever and around the touchscreen display. I had plans to add rally lights on the front, but I’m saving that for the ‘23 Countryman SE that’s coming soon. Thought I’d share what I’ve done to inspire some ideas!
Click to expand...
Love the front grill. How hard was it to install and whats the splitter for?
 
Only must-have mods (aside for that all cork interior) would be BimmerCode and reflective shades for the moon roof.
Tires also make quite a difference. I love the OEM Hankook summers having driven on several different tires now.
 
MarkSasaki said:
Had my SE for 8 days... Mods include, KW coilovers, NM Engineering wheels (from my 2019 Mini), ceramic tint. Incoming is carbon fiber dash overlays and OEM all weather mats. I ordered the car with the black waistline trim and hood stripes. Also, completely de-yellowed everything except the shifter.

View attachment 17210
Click to expand...

What's the spec on these wheels? Any need for spacers for clearance?
 
You must log in or register to reply here.
Back
Top