Regen error after working on brakes

Discussion in 'Hyundai Kona Electric' started by Graham Howard, May 3, 2020.

To remove this ad click here.

  1. Graham Howard

    Graham Howard New Member

    Just Dismantled front brake callipers and cleaned the brake pads. When i reassembled i had to pump brake to seat the pads but now have a regen error and the brakes seem to be out of sinc with the regen system. Has anyone had this issue out there. In lockdown with no dealer to contact



    Sent from my iPhone using Inside EVs
     
  2. To remove this ad click here.

  3. Well, I had a look through what minimal info I have and from what I've read about bleeding the brakes, I suspect you could have avoided this issue by disconnecting the battery until you had pumped the pedal back up. Perhaps disconnecting the battery now for an hour might bring it back?
     
    Graham Howard likes this.

Share This Page