Separate names with a comma.
To remove this ad click here.
2020 Kona 55000km no any issue. Maintenance cost 0 Sent from my iPhone using Inside EVs
Thanks KiwiME Tim94549 and hobbit. Looks more complex than I thought. I have tried on my home level 2 charger. Exactly the same as KiwiMe said...
Re-read the manual and found some useful info. It says you need unlock all door to disconnect the connector that was what I might not try. Almost...
I tried pulling out the plug but not successful. The colour around the charging port was still green. May be this station the plug is...
I also tried turn on or off auto- lock button inside Kona but no difference. I guess the design is to make sure your FOB is not unauthorized...
Thanks for the answer. FLO is a big EV charging company which has built more than 45000 charging stations in North America. I have pressed the...
Today I went a FLO level 2 charging station charging my 2020 Kona. After starting charging I have something else to do need leave immediately....
[ATTACH] Sent from my iPhone using Inside EVs
[ATTACH] I am very happy with my Kona efficiency Sent from my iPhone using Inside EVs
80% charge I can get 320km here in Ontario. Last week lowest temperatures around -23-27C. A few tips to get longer range 1. Only use steering...
I noticed when SOC is less then 20% max power is limited to 50kw and when low battery warning is on max power is 20kw when SOC is 2% max power is...
I had the same situation last time when I was driving in snow day. As long as clean the snow built in front bumper the alarm was gone. Sent...
I found the charging door only can open in 15s after I open the car door. This is not very clearly described in manual. The first day I owned the...
Just update. I bought an icar pro OBD2 adapter on Amazon.ca [ATTACH]and use car scanner on my iPhone. Works perfectly. [ATTACH] Sent from my...
I put all settings the same as yours still no lucky. Possibly the ELM327 is not compatible with my car. Any chance you can share the store link of...
My car was turned on when I did the test. I suspect the connection advanced settings incorrect. I put screenshots here. Are they the same as...
This is mine looks the same[ATTACH] Sent from my iPhone using Inside EVs
Yes Kona EV is selected. Sent from my iPhone using Inside EVs
Not sure which are car scanner recommended adapters but car scanner is the recommended app of this adapter. I suspect some settings I might miss...
