Separate names with a comma.
To remove this ad click here.
I could not find the exact model that Honda is using, but a similar model states that "The use of such a low-value shunt should permit the IBS...
I would connect your inverter after the ELD(black box) this will allow the car to see the load and increase the power from the dc/dc converter and...
That mov has the writing of 160 76 on it but appears to be on the output side of main mos ic on the bottom ic101 which seems like a switch mode...
I hope not, that would be very dangerous and against code.
In the US a outlet that supplies 240v must be a type 6 or 14 it would not fit a plug that is designed for 120v. There is a chance that they only...
I had what seems like a unique issue with my clarity and an uphill section on the highway today. On my daily commute once I get to the highway...
Completed a full charge with the OEM EVSE at 240v without any issues. Charge time was noticeably slower then my 32a EVSE, around 4.5 hrs from 2...
Yes, the pilot signal would not change as the evse is still limited to that current. There is no safe way to convert the oem charger to 240v...
I made an "adapter" to connect the oem charger to my 14-50 outlet for my normal evse and ran it for 30 minutes on a pre-conditioning cycle. All...
It seems that owners of the Prius Prime are using the oem charger on 240v with no reported issues. The charger looks to be identical to the...
I have taken apart the included charger and unfortunately there is no way to check if the components are rated for more then 120v. the top side of...
It will draw less current when the car is nearing the end of charge to balance the batteries. When charging with the included charger I would see...
The Clarity does not have the option to limit the draw under what the charger is rated for. The charger will send the car information when you...
The Honda Clarity uses a DC-DC buck converter to step down the traction battery voltage to ~14v to charge the 12v battery and run accessories. To...
I went a bit of a different route and bought the single led ones with the cool white bulbs and soldered on warm white SMD's I am pretty happy with...