Recent content by ENirogus

remember, all the wire does is ground the signal wire. you don't need pin removers or anything, the wire leading to the switch assembly wants to be intermittently grounded to toggle the VESS

The wiring schematic calls out the size in square mm

My Niro went into the dealer for the phantom low coolant fix/TSB almost 3 weeks ago and no recurrence thusfar

TO the best of my knowledge, there is no evidence that charging to 100 percent lowers battery life in a managed battery pack. All the 'research' involves charging Lithium cells on a bench in a lab over and over. I don't have a mini, but my Kia I charge to 100 percent the once a week or so I...

One thing about stocks in general, compared to the historical situation, is 401k's Millions of people with their 401k plan set for aggressive growth or tech or whatever, pour money every week into the stock market Just keeps pouring in, mindlessly endlessly One of those stocks is no doubt Tesla...

Necro bump because this comes up first on google. Yes it is a left hand thread. Yes the fluid is still, as far as I can tell, Kia only. Yes it is 100 bucks a gallon[!]

Why would they block AM radio? Was a time when AM was basically required because the Emergency Broadcast System was on AM

Ahh, yes, there is a level of profanity that must be reached before a vehicle will obey

There is no problem so great it cannot be solved by an appropriately sized hammer

The most likely reason for the broken stud is a garage monkey wildly overtorquing it at some point. If it was corroded to the nut however, a dab of never seeze will solve that in the future. Same with the brake disc, a bit on the hub and the philips bolt will make them come off easily in the future

To remove the VESS assembly requires significant work. It can be unplugged with small amount of difficulty While I reflexively push the button to silence the VESS in reverse, it can be handy in crowded or unfamiliar parking lots where you actually wish to draw some attention

Buy one of those hand hammer impact tools, perfect for this

Please read the relevant threads it is not a speaker, it is a electronic sound unit. A resistor will not work Some people do not wish to turn off the sound 'forever' and this is a very simple way[as simple as adding a resistor would be] to preserve the sound at the owners discretion

I meant on the main site not the forums Aside from missing pretty much all the analysts guesses, and having positive cash flow only from emission credits, not much

Reporting on the quarterly report oddly short on the insideevs site