Rivian R1T is the electric pickup truck the world needs

Discussion in 'R1T' started by Domenick, Nov 26, 2018.

To remove this ad click here.

  1. To remove this ad click here.

  2. So, here are the specs for easy reference.
    Rivian R1T specs a.jpg
    Rivian R1T specs b.jpg
    Rivian R1T specs c.jpg
     
  3. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    It's fantastic to finally see some details on Rivian's light truck! I won't call it it a "pickup", not with a bed even shorter than a "super short" pickup bed. I'll call it an SUT (Sport Utility Truck), like the Honda Ridgeline.

    I think Rivian has made some smart design choices. Putting in a bed that short will discourage people from using it to haul really heavy loads, which would cut down a lot on the EV range.

    Of course, that will more or less limit the market to the "suburban cowboy" crowd, rather than those who want a practical pickup for hauling or offroading, but nothing wrong with starting out by aiming for that market segment. Just like Tesla with the Model S, Rivian doesn't have to capture the entire market with their first mass-produced vehicle; they just have to sell every one they make!

    * * * * *

    There wasn't much forum discussion of Rivian before this thread was created, but for those who want to see the sparse pre-reveal discussion, it can be found here:

    Rivan Automotive


     
    Remarksman likes this.
  4. With the tailgate down, it can still handle a pretty mighty load of 4X8 plywood, or what have you. I, too, bemoan, the short beds in today's trucks but when people insist on using it like a car, I guess 4 doors are necessary. Back in the day, I used to say if it's got more than 2 doors, it's no longer a pickup truck, but I've convinced myself to just let it go.

    Regarding the original Rivian thread, I've moved it into this new section as well. There isn't yet an official forum for would-be owners, so I really, really hope we can make this a welcoming place they can call home.
     
  5. To remove this ad click here.

  6. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    Thank you for your diligent work in keeping this forum organized, Domenick! Much appreciated.
    :)

    Well, I don't plan to get into any arguments over the semantics of calling the Rivian RT1 an "SUT" vs. calling it a "pickup". Rivian is calling it a "pickup", so me saying it's not is basically swimming upstream against a strong current. That is, I'm not likely to make any progress that way. ;)

    If Rivian can convince people the RT1 is a "pickup" despite its extra-extra-extra short bed, and if that will help them sell more RT1s, then more power to Rivian! Their success in the market is important, and the semantics of what does or doesn't fit in the pigeonhole labeled "pickup" or the pigeonhole labeled "SUT"... isn't.

    Fortunately, it being a free country, I can continue to call the RT1 a "SUT" rather than a "pickup"; the Grammar Gestapo are not gonna come and take me away, no matter how many people call this light truck a "pickup".
    ;)
     
  7. Hopefully, the day will come when people will argue about the size of the frunk. (It's going to be hard to beat this one)

    [​IMG]
     
  8. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    I think the Bollinger B1 is the one with the frunk which is going to be hard to beat!

    [​IMG]

    If a "tailgate" is on the front, does that make it a frontgate? ;)

    Anyway, I think putting a gate at the front of a BEV's front storage space is brilliant!
     
    Last edited: Nov 26, 2018
    Remarksman and Domenick like this.
  9. That is an awesome frunk, to be honest. They're going to have to have a frunk off.
     
    Remarksman likes this.
  10. To remove this ad click here.

  11. RLXXI

    RLXXI Active Member

    Stoked to see where this is headed. Hopefully it won't wind up in a void like the Persu Venture vehicle. I registered for that vehicle as an early purchase and was ready to buy one 5 years ago. The website is still there but the vehicle was never realized for some odd reason. www.flytheroad.com if your curious what I'm talking about. So I bought an F150.

    I'd like to see a super cab version of this truck so it has a realistic cargo (bed) space. Don't need a people hauler, need a cargo hauler.
     
  12. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    :) :) :)

    Are you sure the term "frunk off" is safe for work?
    ;)

     
    Domenick likes this.
  13. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    What was I thinking?!?! :eek:

    The correct term, of course, should be headgate.
    o_O
     
    Domenick likes this.
  14. NeilBlanchard

    NeilBlanchard Active Member

    The R1T can tow 11,000 pounds. It has four 147kW motors.
     
  15. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    It will be interesting to see if the production version has 4 motors. There have been several prototype BEVs which used 4 in-wheel or axle motors, rather than "inboard" motors. For example, the prototype Mitsubishi i-MiEV had in-wheel motors.

    But such placement is pretty hard on the motors; it subjects them to a lot of wear-and-tear, and a lot of exposure to dust and grit from the road. It also significantly increases the unsprung weight that the suspension has to handle. For those reasons and others (such as higher cost), so far as I know, no production BEV has yet used in-wheel or axle motors.

    We'll have to wait and see if the production RT1 is an exception to that rule. IEVs chief editor Steven Loveday says this is the production version. But with production about two years away, things may change.

    I'll be following the development of Rivian's vehicles closely. I certainly hope they succeed in selling a popular SUT, whether it has 4 motors or just two!
    :)
     
  16. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    That's a cavernous frunk on the RT1, all right!

    [​IMG]

    And if some EV basher doesn't agree, we can just tell them to frunk off.
    ;)
     
  17. NeilBlanchard

    NeilBlanchard Active Member

    The car you are thinking off that Mitsubishi was involved in, that had hub motors came out after the i MiEV. The i MiEV is a conversion of a Kei car, and it only has a 49kW motor.
     
  18. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    No, I'm thinking of the i-MiEV, whose pre-production prototype(s) -- as I said -- had in-wheel motors.

    From Wikipedia:

    MIEV (Mitsubishi In-wheel motor Electric Vehicle) or MiEV (Mitsubishi innovative Electric Vehicle) is the name given by Japanese automaker Mitsubishi Motors (MMC) to its alternative propulsion technologies. From late 2006, “MiEV” encompasses all of Mitsubishi Motors’s electric drive systems work, including lithium-ion batteries, in-wheel motors and other technologies related to electric vehicle(EV), hybrid-electric vehicle and fuel-cell vehicles.

    The Mitsubishi In-wheel motor was first introduced in the Mitsubishi Colt EV, a Colt-based concept car first exhibited at 2005 Tokyo Motor Show which used a series of lithium-ion batteries to power electric motors located in the wheels. Subsequent electrically powered vehicles have included a 200 kW Lancer Evolution, and a battery-equipped Mitsubishi i kei car (i-MIEV).

     
  19. Mitsubishi was all about the in-wheel motors back then. In their concepts, at least.

    At any rate, pretty sure the Rivian doesn't in-wheel motors. I'm casting about looking for a shot of the underside, though.
     
  20. Pushmi-Pullyu

    Pushmi-Pullyu Well-Known Member

    Okay, then what kind of motors are they? Axle motors? Or are they actually 4 separate inboard motors connected to each wheel independently by separate sets of reduction gears and separate axles or half-shafts? (Is that the right term for front wheel drive axles: "half-shaft"?)

     
  21. I'm told they're relatively small units that sit beside each other in the space where the differential would be. I imagine they are connected to axles, which are then connected to CV axles closer to the wheel.
     
    Michael-- likes this.

Share This Page