Vanity License Plates for Electric MINI Coopers

My first thought was Pantone/hex color codes, but #b71b00 is a shade of red. Is that red considered complementary to Moonwalk Grey, perhaps?

Anyway, if those are color codes, I love that idea for a plate! :cool:
Super close!
B71 is the color code for Moonwalk Grey. I didn't expect anyone to know that code, so that's impressive that you guessed it was a color code. That's the first half, anyway.

The second part is almost a given, now.

On a related note, I just got my C4N paint in. It's energetic yellow to paint the numbers on my black CA plate so that the yellow matches the car. I'm also going to paint the brake calipers like this:
89173241_2582707371854682_3940335432666972160_n.jpg
 
Last edited:
Not sure if the cops will actually care but I'm pretty sure that's illegal... I'm sure it'll look great though lol
The original license plate yellow fades from a gold to a dull light yellow that's pretty close to energetic yellow. Highly unlikely that anyone will notice, but still illegal.

I'll try to remember to take a picture comparing when I actually get the plates in. Could be 8 more months. Work shortage at Folsom jail, apparently.
 
On a yellow related note, I just got my HOV/carpool stickers (which will be the last ones offered in the program), and they're yellow. Not energetic yellow, but...
HOV_sticker_yellow.png

... and I put them on last night, and they look bad (no good spot to hide them on the bumpers due to the plastic cladding).
 
On a yellow related note, I just got my HOV/carpool stickers (which will be the last ones offered in the program), and they're yellow. Not energetic yellow, but...
HOV_sticker_yellow.png

... and I put them on last night, and they look bad (no good spot to hide them on the bumpers due to the plastic cladding).
Mine are on order.

Can post a pic of where you put your stickers? How long dd it take for your stickers to arrive? Thx.
 
It took about 4-5 weeks to get the stickers after I received my plate number.

In retrospect, I should've just put them on the plastic as low as possible.
 

Attachments

  • PXL_20220209_005956459.MP.webp
    PXL_20220209_005956459.MP.webp
    74.4 KB · Views: 57
  • PXL_20220209_005936363.MP.webp
    PXL_20220209_005936363.MP.webp
    53.9 KB · Views: 50
It took about 4-5 weeks to get the stickers after I received my plate number.

In retrospect, I should've just put them on the plastic as low as possible.
Thanks. I see that there isn’t an obvious best place to put them.
 
Thanks. I see that there isn’t an obvious best place to put them.
mine are blue.....on a chili red. On top of that I had to add an orange parking permit to my back windshield. UGH.
I kind of like the yellow, it works with the little EV badge/S badge in front (at least better than my blue ones)!

edit: I realize now that yellow is "energetic yellow", but honestly I think they look pretty clean relative to how mine look
 
Is there any advantage to having an "alternative fuel" license plate? Or is it just cosmetic?

View attachment 15510

In Ontario, having a “green” license plate allows you to use High Occupancy Vehicle lanes even if you are the sole occupant.


Mike Wazowski [emoji1063][emoji1063][emoji1063]
[emoji4][emoji4] & [emoji23][emoji23] more [emoji298]️[emoji298]️[emoji298]️ than [emoji33] [emoji33] & [emoji22][emoji22]
 
It took about 4-5 weeks to get the stickers after I received my plate number.

In retrospect, I should've just put them on the plastic as low as possible.

I think mine are coming in the next week or so. I don't really need them often and don't want difficult-to-remove stickers on the car, so trying to figure out how to make them removable.

There are some magnetic options, but the car isn't metal in those spots:

https://www.slappass.com/
https://hovmags.com/

There's this cling-film backing but I expect it will stop sticking after a few removals:

https://clean-cling.com/products/california-clean-air-vehicle-clean-cling
https://abstractocean.com/products/hov-clings

Maybe I'll just scotch-tape them on for the occasional HOV highway drive o_O

On-topic for the thread... I just got CA black sequential plates. Couldn't come up with a vanity that I loved that was available. Considered BLAKTEA for a while.
 
I think mine are coming in the next week or so. I don't really need them often and don't want difficult-to-remove stickers on the car, so trying to figure out how to make them removable.

There are some magnetic options, but the car isn't metal in those spots:

https://www.slappass.com/
https://hovmags.com/

There's this cling-film backing but I expect it will stop sticking after a few removals:

https://clean-cling.com/products/california-clean-air-vehicle-clean-cling
https://abstractocean.com/products/hov-clings

Maybe I'll just scotch-tape them on for the occasional HOV highway drive o_O

On-topic for the thread... I just got CA black sequential plates. Couldn't come up with a vanity that I loved that was available. Considered BLAKTEA for a while.
Did you just order your plates or just receive them?

I struggled w picking what I wanted, bc I wanted something that wasn't overtly obvious. Wanted to use B2TFF56 (back to the future), but went w B71B00 in the end.
 
Did you just order your plates or just receive them?

I received them a few weeks ago. Not sure how long it took after ordering but they arrived quicker than I expected. Another reason I didn't do vanity is they say they take 6+ months to show up and I didn't want to wait that long for black plates on my blackout config. I could always do vanity later if I get inspired.
 
"MIN E V" anyone can steal this idea.
I dont want a personalized plate on my daily. I recently saw a jerk with a custom plates that cut me off a while back. He wasn't expecting the brake check. He also is looking for the nondescript silver sedan that brake checked him. If I had my toy with the custom plate I couldn't have done that (definitely not with the Pagid orange pads on the car and expected to keep my rear bumper).
 
Back
Top