/ Register

GOM Range change using nav and not.

Discussion in 'Hyundai Kona Electric' started by XtsKonaTrooper, May 26, 2019.

To remove this ad click here.

  1. May 26, 2019 #1
    XtsKonaTrooper

    XtsKonaTrooper Well-Known Member

    SW Ontario
    Ok i got in the car yesterday and used the nav, as i was going to a unfamiliar place.
    Before setting destination , Gom showed 411, then when i hit start navigation, gom goes to 464.
    If i check battery screen, shows whatever gom says.
     

    2. To remove this ad click here.

  2. May 26, 2019 #2
    Esprit1st

    Esprit1st Well-Known Member

    2019 Hyundai Kona Ultimate, Roswell, NM
    That is interesting! I always wondered if the gom and the Navi work together and maybe even factor in things like elevation change?

    That would be awesome! The question is how to prove that.

    Sent from my moto x4 using Tapatalk
     
    XtsKonaTrooper likes this.
  3. May 27, 2019 #3
    KonaTom

    KonaTom Well-Known Member

    Duncan BC
    I’m going to play around with that to see if I can prove it.
     
    XtsKonaTrooper and Esprit1st like this.
  4. May 27, 2019 #4
    XtsKonaTrooper

    XtsKonaTrooper Well-Known Member

    SW Ontario
    Im thinking its taking speed limits along the route into consideration. Because along that route, max road speeds were 80 or 90 km.
    I tried setting it to longer prev destinations but the difference was only 6km. Because i believe it was mostly utilizing 100km speed routes.
    I am going to try setting that rural route today again and see if its a big difference again.
     
    electriceddy and Esprit1st like this.

Share This Page